Dillon Small Media Separator CM-2000

Dillon Small Media Separator CM-2000
Dillon Small Media Separator CM-2000
Dillon Small Media Separator CM-2000
Dillon Small Media Separator CM-2000
Dillon Small Media Separator CM-2000 Dillon Small Media Separator CM-2000 Dillon Small Media Separator CM-2000 Dillon Small Media Separator CM-2000
€ 167.23
incl. 0% VAT - taxfree
plus Shipping costs
when shipping to United States of America
Available from stock
(currently 1 unit in stock, more in 3 - 4 weeks)
Detailed information about delivery times
article number:
DI20675
Add to wish list

Product description

In the Package, you will find:

1x Media collection Tube
1x Media Separator cage
1x Rod with Handle
1x Instructions for case preparation
1x Bag with Mountingparts:
1x Hex key
2x Metal bracket
6x Short screws
2x Long screws
8x Nuts
8x Washer

Assembly:

Step 1: Mount the Metal brackets to the inside of the Tube.
Put 3 short screws through each bracket and the Tube from inside to the outside
From the outside add washers and nuts tighten them using the hex key.

Step 2: Assembly of the media separator unit
Open the cage by pulling both of the black hooks at the same time.
Insert the Rod with the Handle either on the right or left side depending on if you are right or left handed.
We suggest to install the handle in the lower position, so it is out of the way when you insert the Media and the cases.
Put the two long screws through the rod and the lower part of the cage.
Secure the screws with the remaining washer and nuts.

Usage:

  1. Turn the media separator unit in that way that you see the two black hooks with the opening facing down in front of you.
  2. Lift the unit slightly and move it ~1cm towards the side with the handle, one of the two locking pins should lock into the metal bracket on the tube.
  3. Pull both black hooks at the same time and open the media separator unit
  4. Insert the media and cases into the lower part of the cage.
  5. Close the media separator unit and make sure both hooks did snap in.
  6. Move the unit ~1cm away from the Bracket on the handle side to unlock the locking pin from the bracket.
  7. Use the handle to turn the media separator unit slowly, alternating directions, if you start to fast you will lose some of the cleaning media.
  8. When no Media is coming out of the media separator unit, secure it like in step 2
  9. Open the Unit like in Step 3 and check if the cases are free of media.
  10. If there is still media left in the cases repeat process.
  11. Remove the clean Cases from the media separator unit and return the media into your storage container or tumbler.

Customer Reviews

5 Stars
5
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0

Most Helpful Customer Reviews

Roger W. from Switzerland in April 2018
Sehr grosse wanne und netz!

Customers who bought this product also bought

DAA Extra-Short Dillon Powder Bar für XL750

DAA Extra-Short Dillon Powder Bar für XL750
€ 36.95
(incl. MwSt. plus shipping costs)

Hornady Decapping Die

Hornady Decapping Die
€ 49.95
(incl. MwSt. plus shipping costs)

Dillon XL650/XL750 Conversion kit

Dillon XL650/XL750 Conversion kit
€ 146.90
(incl. MwSt. plus shipping costs)

DAA Turbo Case-Feeder Plate for Pistols

DAA Turbo Case-Feeder Plate for Pistols
€ 49.95
(incl. MwSt. plus shipping costs)

Armanov Case Feed Stop for Dillon XL650 / XL750

Armanov Case Feed Stop for Dillon XL650 / XL750
€ 8.80
(incl. MwSt. plus shipping costs)

Armanov Quick Disconnect for Dillon powder measure

Armanov Quick Disconnect for Dillon powder measure
€ 24.90
(incl. MwSt. plus shipping costs)

Hornady Custom grade die set

Hornady Custom grade die set
€ 71.90
(incl. MwSt. plus shipping costs)

DAA Universal Cleaning Kit

DAA Universal Cleaning Kit
€ 39.95
(incl. MwSt. plus shipping costs)

CED Stainless steel pins 3.5lbs

CED Stainless steel pins 3.5lbs
€ 49.00
(incl. MwSt. plus shipping costs)